Connecting Kermi radiators, do-it-yourself installation and dismantling. Connecting Kermi radiators, do-it-yourself installation and dismantling Installation of a Kermi heating radiator inside and out

One of the activities of the "Warmth and Comfort" company is the installation of Kermi radiators. We are pleased to offer you a battery installation service, which is deservedly popular. You can easily select the radiators you need and can take advantage of the help of professionals when placing them in your home or other facility!

Types of famous brand batteries

Panel steel ThermX2. Such batteries are created according to European standards, are low in cost and have a wavy surface. They can only be used in autonomous (closed) heating systems.
Kermi radiators, connected from the side (Profil-K). Such batteries are equipped with convectors. The panels of the models are made of profiled sheets connected by welding. There are screens on the sides. An overhead grille is placed on top of the batteries.
Radiators connected from below (Profil-V). A thermal valve is built into the design of such batteries. The temperature controller is not included in the package. These products are suitable for two-pipe heating systems.
Steel tubular radiators. Such models are able to effectively heat the room and are an important part of the interior. German designers have developed several designs that can satisfy even the most demanding consumers. Beautifully intertwined steel pipes become a real decoration of any space. Such Kermi brand models are convenient due to their easy installation. No modifications to the heating system are required for installation.

Description of service	Unit	Price
Manual arc welding of ferrous metals for	1cm. seam	from 50 rub.
Pipe welding	1 joint	from 200 rub.
Plumbing work
Replacing a heating radiator - batteries (2 pcs. or more)	1 PC	4000 rub.
Installation of a heated towel rail	1 PC	from 1500 rub.
Insertion into the water supply/heating riser	PC. up to d50	from 500 rub.
Installation of a jumper (bypass) for a heated towel rail	1 PC	6000 rub.
Filter and counter installation	PC.	700 rub.
Replacing sewer pipes throughout the apartment	1 point	from 500 rub.
Installation of supply pipes to the heated towel rail	1 PC.	from 1500 rub.
Piping throughout the apartment is polypropylene	1 PC. (hot water/hot water point)	from 2000 rub.
Replacing a hot/cold water riser with water access to an apartment (floor)	floor	4500 rub.
Relocation of cold/hot water/heating riser (piece floor)	pcs. floor	4000 rub.
Replacing the heating riser	floor	3500 rub.
Replacing taps	PC	500 rub.
Manufacturing of metal structures (cost of finished product)
Welded fencing (grids, gates)	p.m.	from 500 rub.
Fence (welded, chain-link mesh)	p.m.	from 1000 rub.
Trade and warehouse equipment (racks, shelving, furniture)	p.m.	from 1500 rub.
Metal structures and metal products according to customer drawings	ton	from 15,000 rub.
Piece products		negotiable
Additional services
Painting work, surface priming	p.m.	from 50 rub.
Metal delivery in Moscow and the region		from 1500 rub.
Cutting metal in one go		from 10 rub.
Welding and installation work		negotiable

How is installation done?

Our technician will first visit your site. He evaluates all the features of the heating system. If necessary, a specialist will advise you on the selection of Kermi products and answer all questions. In addition, the master draws up an estimate for the installation of batteries and additional services that will be provided.

To install Kermi batteries, old products are dismantled (if they were installed). After this, in accordance with the manufacturer’s recommendations, specialists install new models. The final stage is the installation of additional components (thermostats, etc.). If necessary, additional Kermi fittings are installed. It allows you to shut off the coolant flow and solves other problems. You can find out all the details from our specialists.

Advantages of contacting the company "Warmth and Comfort"

Highly qualified specialists. Installation of Kermi batteries in a heating system is carried out only by experienced professionals. Masters have all the necessary knowledge and skills. They have been working with Kermi products for a long time and know about all its features.
Guarantee for the services provided.
Availability of equipment and quality materials necessary for installation of radiators. Our specialists complete all assigned tasks in the shortest possible time.
Opportunities for solving problems of any level of complexity. Our specialists have experience working with all radiators. They can design a heating system and implement all your wishes.
Optimal cost of work. You can get information about prices from managers.
Help from specialists at all stages of work. Managers will answer all questions, calculate the cost of installing any necessary batteries before work begins, and provide a full estimate. This will allow you to plan expenses in advance.

Contact us! Use high-quality radiators from a well-known brand. With them you will not only heat your house or other object, but also make it stylish and modern. During the operation of batteries installed by our professionals, no difficulties will arise.

Which heating radiators should I buy, what should I choose, and who should I trust to install heating devices? As in other matters related to the construction of a private house or apartment renovation, you can completely take on the solution of all issues or entrust the work to professionals.

But when installing heating, a large number of difficulties arise, while the heating system is planned to be installed once, and you want it to last for many years and not make you regret the money you once saved on the subsequent removal and installation of the radiator. In this article we will try to figure out how to properly create a heating project for your home, and we will tell you about the principles of installing and connecting kermi radiators to the heating system.

Any search engine on request will return many sites that, without any problems, will create a project for you and compile a list of equipment that you will need to purchase (specification). The cost of these documents will directly depend on the number of square meters in your home and the level of complexity of the heating network. In addition, a number of other factors are taken into account that also affect the cost of creating a project. We recommend that you provide the prepared documentation to the installers for review, or take into account the information provided by equipment suppliers, since heating devices vary in configuration.

In this article, we will not go into detail about the installation and configuration of heating boilers, the laying of pipe lines, the purpose of pumps, or which heating system to use in a particular case. Here we will discuss only the principles of installing heating radiators. Buying heating radiators with a full set of mounting accessories is not a problem. After all, KERMI steel radiators are supplied with a complete installation kit.

Complete set of radiators Kermi (Kermi) FKV, FKO

The standard KERMI FKV radiator kit includes:

brackets for mounting the heating battery on the wall;
Mayevsky valve;
thermostat valve;

The standard KERMI FKO radiator kit includes:

heating radiator, selected by size;
bracket for mounting the device on the wall;
stub;
Mayevsky valve;
separation plug;
key for installing the separation plug;
dense polyethylene packaging.

Mounting (installation) of radiators with bottom connection

The principles of installing radiators with your own hands are quite simple. First of all, remove the mounting plates from the packaging. Do not rush to completely remove the protective film from the radiator; it will keep its surface in perfect condition until the completion of construction work in the house. Next, you attach the plates to the walls (you need to correctly calculate the installation height of the fastening, the distance between the plates: they must be at the same level). If you install the brackets incorrectly, the heating radiator may be installed crookedly, or simply will not fit into the grooves. After this operation, you should put the heating battery on the mounting plates. We remind you that the distance from the floor to the radiator and from the radiator to the window sill should be from 10 to 13 cm above and below.

Thus, we installed heating batteries. After this procedure, you need to connect the battery to the heating system. This will require additional accessories that are not included in the standard kit. Heating radiators with bottom and side connections require different components. The KERMI FKV is connected to the heating system thanks to a connection group (multiflex), cone inserts, a fitting (eurocone) with a 2/3 union nut (this fitting is purchased along with the pipes). The connection sequence is as follows. We take two conical inserts and place them tightly into the radiator connection pipes, after which we screw on the connection group and tighten it tightly with a wrench. Next, we take the Eurocone, attach it to the pipe and simply connect the pipe and the multiflex (when using polypropylene pipes, you must additionally purchase two cone inserts that are placed between the fitting and the multiflex). The most important thing to remember is that in a radiator the coolant flows in a certain direction, so the supply is always the inner tube, and the return is the outer. We left the simplest thing for last: installing the thermostat. You just need to screw it onto the mounting location.

Replacing heating radiators with bottom connections

is not difficult. Before starting work, it is necessary to shut off the supply of coolant (hot water) to the heating radiator; this is very easy to do, since this feature is already provided on the multiflex. After that, you should unscrew the connection between the radiator and the multiflex, and then simply remove the radiator from the mounting plates.

Do-it-yourself radiator installation with side connection

First, we recommend reading the radiator installation instructions that come with the kit. It describes some features of installing heating radiators, such as: the coolant supply should be made at the top of the heating radiator, and the return should be at the bottom of the radiator. It doesn’t matter which side the supply and return will be on. In order for the THERM X2 system to work correctly on batteries with types 12, 22, 33, you need to install a separation plug on the return line, but everything is in order.

At the first stage, we install the mounting plates on the wall: you need to correctly calculate the mounting height and the distance between the plates; the plates must be at the same level. If you install the plates incorrectly, the heating radiator may be installed crookedly, or simply not fit into the grooves. After this operation, you simply need to put the radiator on the mounting plates. We remind you that the distance from the finished floor to the radiator and from the radiator to the window sill should be in the range of 10 to 13 cm above and below. The main thing is not to completely remove the protective film, as it will help keep your heating device in perfect condition until the repair is completed. But the installation of heating batteries does not end there. It is necessary to install the THERM X2 separation plug on the return line. This plug does not allow the cooled coolant to remain in the heating battery and removes it from the radiator.

Now let's connect the radiator to the heating system. To do this, you will need two valves, one to supply fluid to the battery, and the second to remove fluid from the battery. Let's start with the intake valve. Connection dimensions ½, external thread. Please note that for ease of installation and replacement of heating batteries, this valve must be equipped with an “American” valve. We separate the valve from the American, screw the valve onto the heating pipe, then screw the American into the battery. Then we connect the two elements of the intake valve. Now we connect the check valve. The process is the same as when installing the intake valve. After this, the heater is ready for use.

Installing the separation plug for kermi

Place the mounting key in the separation plug. Then visually verify the correct connection. When the key handle is positioned horizontally, the plug should be in a vertical position. We install a plug in the heating radiator. To do this, bring the plug to the battery, pay attention to the arrow on the key (the arrow should point to the back plate of the heating battery). Insert the separation plug into the connecting thread of the radiator. For convenience, you can slightly squeeze the plug and, moving it back and forth, insert it until it stops. Remove the mounting key. Connect the heating batteries.

Replacing heating batteries with bottom connection

Replacing batteries will also not be difficult. You just need to shut off the supply of coolant to the heating radiator at the inlet and return valves, unscrew the American connection, after which you just need to pull it off the mounting plates, and you can replace it.

Conclusion

Now we know that you can buy heating radiators anywhere and you can install heating batteries yourself, and replacing heating batteries is not a problem at all, given that the installation was done correctly and using suitable shut-off valves.

Quite often, homeowners complain about poor-quality heating; many believe that the reason is in the heating devices, but most often the cause of this problem is poor-quality installation of radiators or the heating system as a whole.

Choosing heating radiators on your own is not easy, since you need to know many nuances and subtleties associated with the room heating system.

For example, centralized systems are characterized by hydraulic shocks that can rupture some types of batteries.

Autonomous systems do not pose any particular threats, but they also require the correct selection of heating devices that meet technical and operational requirements.

Each manufacturer produces its own products for certain systems; only a professional will be able to correctly select the optimally suitable heating units from a huge assortment.

Naturally, you can consult with a heating equipment seller, and he will definitely help you make a choice, but the installation of radiators should only be trusted by a professional.

What are the advantages of working with our company?

Huge selection of the best heating equipment.

Reasonable prices.

Assistance in technical calculations and selection of radiators suitable in power and dimensions.

Professional consultation.

Operational work of managers, couriers and installers.

Possibility of obtaining a whole range of services: purchase, delivery, turnkey installation.

Warranty for purchased equipment and installation work performed by our employees.

Purchasing high-quality heating batteries does not guarantee efficient operation of the heating system. The key to high-quality heating is the professional organization of the pipeline and the connection of radiators.

_______

Why shouldn’t you install heating equipment yourself?

Lack of experience and knowledge can lead to serious damage to instruments and system malfunction.

Unprofessional installation is most often the reason for poor operation of devices.

Emergencies: leaks, floods and even battery ruptures.

Our company sells heating equipment, and also offers customers delivery to their address and assistance in creating heating systems and connecting heating radiators.

_____________________________________________________________________________________________________________

Our key advantages:

Wide range of heating equipment.
The entire model range is in stock.
The most affordable prices for radiators and installation work in Moscow.
Extensive work experience.
Individual approach.

We offer the services of proven installers with experience and a wealth of knowledge, special education and recommendations. Services such as replacing old batteries and installing new modern heat sources are in great demand in Moscow and any other city, and finding a trusted technician has always been a problem.

_____________________________________________________________________________________________________________

Brief list of installation services:

Dismantling of old units.
Building the system from scratch.
Replacement of supply and return pipes.
Installation of radiators and valves.
Diagnostics and maintenance.

We have found the best plumbers, engineers and designers who are ready to help you arrange your home or office at any time convenient for you. Our company has a large staff of mobile technicians, so you won’t have to wait long.

Installation of heating systems from scratch should consist of several stages:

Design and technical calculation of power.
Selection of radiators, pipes, shut-off and control valves, thermostats.
Organization of the pipeline and connection of equipment.
System startup and testing.

By calling a contractor, you free yourself from many problems and worries, save your time and receive a guaranteed high-quality heating system, made in accordance with the latest standards and professionally connected radiators.

_______________________________________________________________________________________________________________

How are heating batteries connected?

Our specialist arrives on the appointed day.
Secures the mounting brackets.
Installs radiators.
Connects devices to the pipeline.
Conducts a test run.
Consults the customer on the operation of the heating system.

Our installers travel throughout Moscow, and travel to the Moscow Region is possible. We give warmth and make sure that cooperation with us brings pleasure to every client. Our company always makes every effort to meet new and regular customers, so the cost of services can be reduced or arranged in installments, we offer favorable payment terms, drawing up an agreement and a guarantee for equipment and installation work.

Call right now, order radiators with delivery + installation and get a discount! Don't miss the opportunity to make your home warmer and more comfortable.

Cost of installation and installation of Kermi radiators

№	Name of works:	Unit measured	price, rub.
1	Dismantling the heating radiator	1 PC.	600
2		1 PC.	2800
3	Installation of a heating radiator (polypropylene liner)	more than 2 pcs.	2400
4	Installation of a heating radiator (metal liner)	1 PC.	5400
5	Dismantling/installation of the radiator on a ready-made connection	1 PC.	1500
6	Dismantling of heating pipes (D=1/2)	p.m.	100
7	Dismantling of heating pipes (D=3/4)	p.m.	150
8	Dismantling heating pipes (D=1")	p.m.	250
9	Through drilling of walls in plaster, foam block up to Ø20 mm	cm.	3
10	Through drilling of walls in bricks up to Ø20 mm	cm.	4
11	Through wall drilling in concrete up to Ø20 mm	cm.	8
12	Through drilling of walls in plaster, foam block up to Ø32 mm	cm.	4
13	Through wall drilling in brick up to Ø32 mm	cm.	6
14	Through wall drilling in concrete up to Ø32 mm	cm.	11
15	Laying heating pipes (polypropylene D=20)	p.m.	150
16	Laying heating pipes (polypropylene D=25)	p.m.	200
17	Laying heating pipes (polypropylene D=32)	p.m.	300
18	Thread cutting (D = 1/2)	PC.	350
19	Thread cutting (D = 3/4)	PC.	500
20	Thread cutting (D = 1")	PC.	750
21	Installation of ball valve (D = 1/2)	PC.	350
22	Installation of ball valve (D = 3/4)	PC.	500
23	Installation of ball valve (D = 1")	PC.	750
24		1 PC.	3900
25	Installation of a heating radiator (iron liner)	more than 2 pcs.	3400
26	Installation of a non-standard size heating device, cast iron radiators on legs, bench radiators	PC.	4400

Complete set of radiators Kermi (Kermi) FKV, FKO

The standard KERMI FKV radiator kit includes:

brackets for mounting the heating battery on the wall;
Mayevsky valve;
thermostat valve;

The standard KERMI FKO radiator kit includes:

heating radiator, selected by size;
bracket for mounting the device on the wall;
stub;
Mayevsky valve;
separation plug;
key for installing the separation plug;
dense polyethylene packaging.